ABB 07KP64 GJR5240600R0101 Procontic T200 RCOM RS-232 Communication Processor

Manufacturer: ABB
Product Number: GJR5240600R0101
Product Model: 07KP64
Product Type: Procontic T200 RCOM Communication Processor with RS-232 Interfaces
Condition: Brand New
Weight: 0.5 kg
Shipping Port: Xiamen
Warranty: 12 Months
Payment Methods: T/T, Western Union

WhatsApp

ABB 07KP64 GJR5240600R0101 Procontic T200 RCOM Communication Processor

The ABB 07KP64 (GJR5240600R0101) is a dedicated communication processor designed for the Procontic T200 programmable logic controller system. It provides serial communication capabilities using the RCOM protocol, enabling data exchange between compatible ABB automation systems and remote control equipment.

The module features two RS-232 serial interfaces with distinct communication functions. One interface is used for RCOM communication, supporting data transmission over dedicated or dial-up communication lines. The second interface provides access for programming, diagnostics, and commissioning activities.

A notable feature of the 07KP64 is its ability to operate as either an RCOM master or slave. An RCOM network can support up to 254 slave stations, allowing communication across multiple compatible control systems. When integrated with ABB MasterPiece 200 systems, the supported network configuration has additional limitations that must be considered.

The RCOM protocol supports several control and data-management operations, including cold start, warm start, reset, clock synchronization, data reading, data writing, and event polling. These functions make the module suitable for distributed automation installations that require communication between geographically separated controllers or interconnected PLC systems.

The 07KP64 occupies one slot in the Procontic T200 basic module rack. Its dedicated communication architecture makes it a practical choice for applications requiring serial data exchange and remote communication within compatible ABB control environments.

Manufacturer:ABBProduct Model:07KP64
Product Number:GJR5240600R0101Product Family:Procontic T200
Product Type:Communication ProcessorCommunication Protocol:RCOM
Serial Interfaces:2 × RS-232Interface Standard:RS-232-C (V.24)
Operating Mode:RCOM Master / SlaveMaximum RCOM Slaves:254
Communication Medium:Dedicated or Dial-Up LinesModule Slot:Slot 1
Data Functions:Read / Write / Event PollingControl Functions:Cold Start / Warm Start / Reset
Clock Function:Clock SynchronizationSystem Compatibility:ABB Procontic T200
Programming Software:907 KP 64Diagnostic Interface:RS-232-C Console
Dimensions:120 × 80 × 60 mmWeight:0.5 kg

Q1. What is the main function of the ABB 07KP64 GJR5240600R0101?

The 07KP64 is an RCOM communication processor for the ABB Procontic T200 PLC system. It enables serial communication between compatible automation controllers and remote systems using the RCOM protocol.

Q2. How many serial communication interfaces does the 07KP64 provide?

The module provides two RS-232 interfaces. One is used for RCOM communication, while the other is intended for programming, diagnostics, and commissioning.

Q3. Can the ABB 07KP64 operate as both an RCOM master and a slave?

Yes. The module supports both operating modes. Its role depends on the communication configuration, allowing it to participate in different RCOM network arrangements.

Q4. How many slave stations can be connected through an RCOM network?

The documented RCOM configuration supports up to 254 slave stations. When communicating with ABB MasterPiece 200 systems, the supported number of slaves is limited to eight.

Q5. Which software is required to configure the 07KP64?

ABB provides the 907 KP 64 programming software for creating communication programs for the 07KP64. It supports RCOM communication between compatible Procontic T200 and MasterPiece 200 control systems.

Q6. What communication functions are supported by the ABB 07KP64?

The module supports data reading, data writing, event polling, cold start, warm start, reset, and clock synchronization. These functions allow compatible control systems to exchange process information and coordinate communication-related operations.

1. Dual RS-232 Communication Interfaces: The 07KP64 provides two serial interfaces with separate functions. One is dedicated to RCOM communication, while the other supports programming, diagnostics, and commissioning. This arrangement allows communication operations and service access to be handled through dedicated connections.

2. RCOM Master and Slave Operation: The communication processor can operate as either an RCOM master or slave. This flexibility allows the Procontic T200 system to participate in different network configurations and exchange data with compatible automation systems.

3. Support for Distributed Communication Networks: An RCOM network can accommodate up to 254 slave stations under the documented configuration. The module supports communication over dedicated or dial-up lines, making it suitable for distributed installations where controllers are connected across separate locations.

4. Comprehensive Data Exchange Functions: The RCOM protocol supports reading and writing data, event polling, cold starts, warm starts, resets, and clock synchronization. These functions provide the communication capabilities required for coordinated operation between compatible control systems.

5. Rack Installation and Interface Wiring: The 07KP64 occupies one slot in the Procontic T200 basic module rack. Before installation, isolate the system power, verify the designated slot, inspect the module connector, and connect the appropriate RS-232 cables according to the ABB interface documentation.

6. Configuration and Commissioning: Use the 907 KP 64 programming software to create and configure RCOM communication programs. During commissioning, verify the master/slave role, communication parameters, serial cable connections, station configuration, and data exchange. Test reading, writing, and event polling functions before placing the communication network into normal operation.

Leave a message

Scroll to Top